06

2026

-

11

It's Not Just for Copper-Clad Laminates: Why High-Voltage Insulation, Wall-Through Components, and High-Frequency Insulation Parts All Choose Quartz Rod

Author:

xiaolanjing


I. First, a frequently asked question: Where exactly are quartz rods used?

 

The applications of quartz rods (high-purity fused quartz glass rods) are often mistakenly thought to be limited to semiconductors and optics. In fact, they run along at least three main lines:
Application lineTypical scenariosKey properties
Electronic-grade CCL / high-frequency substrateCCL support materials, electronic-grade quartz fabric baseHigh purity, low dielectric constant, heat resistance
Drawing stock → quartz fiberQuartz fiber yarn, electronic fabric, aerospace wave-transparent materials99.9%+ high-purity SiO₂ feedstock for fiber drawing
Direct insulation componentsHigh-voltage insulation supports, wall-through components, high-frequency insulation parts, wafer support rodsLow dielectric loss, high insulation strength
The first two lines are familiar — Lanjing Optoelectronics' 4N8 quartz rod has been confirmed suitable for electronic-grade CCL supply. On-site, Lanjing quartz rods were drawn into quartz fiber yarn (up to 5,100 meters long) and then woven into fabric, with successful customer trials now awaiting validation by NVIDIA and other M9-grade CCL customers. The third line (high-voltage insulation supports, wall-through components, and high-frequency insulation parts) is equally worth attention.
 

II. Why is a quartz rod a "natural insulation component"?

 

The insulating performance of quartz glass (fused SiO₂) stems from three underlying properties:
  • Extremely low dielectric loss: High-surface-finish quartz rods can achieve a dielectric loss tangent as low as tanδ < 0.0001, meaning high-frequency signals pass through with almost no loss or interference — the single most valued parameter for high-frequency insulation parts.
  • High resistivity and breakdown strength: Quartz is an excellent electrical insulator and is widely used for electrical isolation in semiconductor manufacturing and high-voltage equipment.
  • Heat resistance without degradation: With a softening point above 1650°C, its insulation performance does not degrade at high operating temperatures — it neither melts nor releases harmful volatiles, eliminating the risk of leakage or short circuits.
Accordingly, quartz rods are used directly in three 细分 scenarios:
  • High-voltage insulation supports: Insulating posts and support frames in high-voltage power transmission and test equipment;
  • Wall-through components: Insulating sleeves for electrical leads or thermocouple leads that "penetrate furnace walls" in high-temperature furnaces, vacuum furnaces, and semiconductor equipment;
  • High-frequency insulation parts: Support components in radar and communications equipment that combine structural load-bearing with microwave transparency.

 

III. What are industry customers doing with quartz materials?

 

Henan Shenjiu Tianhang New Materials is a major pioneer in China's quartz fiber industry. Its SJ101 quartz fiber yarn is drawn from 99.95% ultra-high-purity SiO₂ feedstock, with single-filament diameters of 5–9 μm. According to public materials from China International Composites Industry Exhibition, its quartz fiber products serve customers concentrated in:
 
  • Aerospace: Radomes and antenna radomes (wave-transparent materials), stealth materials, ablation-resistant thermal protection;
  • 5G/6G communications and high-frequency/high-speed PCBs: Low-dielectric-loss electronic fabrics for 5G base stations, automotive electronics, and smart terminals;
  • AI servers and chip packaging;
  • High-temperature insulation / wave-transparent supports: High-temperature insulating supports for radar and aircraft.

 

As we can see: quartz rods are drawn into fiber, fiber is woven into fabric, and fabric enters high-frequency PCBs and aerospace wave-transparent components — a high-purity value chain running from raw material to high-end end products. Meanwhile, high-voltage insulation supports, wall-through components, and high-frequency insulation parts are the near-market applications where quartz rods are used directly as bar stock, without drawing. Both share the same core demand: high purity, low dielectric loss, and heat resistance.
 

IV. Where Lanjing Optoelectronics sits on this map

 

Linyi Lanjing Optoelectronics Technology Co., Ltd. (founded in 1976, a high-tech enterprise in the new-energy and new-materials field) is entering high-purity quartz materials while retaining its infrared heating business, opening a second growth curve:
  • 4N8 electronic-grade quartz rod (SiO₂ purity 99.998%, impurities < 20 ppm, hydroxyl content ≤ 2 ppm): suitable for electronic-grade CCL supply, while also covering direct rod applications such as high-voltage insulation supports, wall-through components, and high-frequency insulation parts;
  • Quartz rod → quartz fiber yarn → quartz fiber fabric: up to 5,100 meters of continuous drawing has been validated, with successful customer trials now awaiting M9-grade CCL validation;
  • Quartz materials to infrared heating: the 4N8 quartz tube body also supports the infrared heating tube product line, forming a dual business loop of "materials + devices."

 

Summary

 

The application landscape of quartz rods spans at least three main lines: electronic-grade CCL / high-frequency substrates, drawing stock (quartz fiber yarn → electronic fabric → aerospace wave-transparent and high-frequency PCBs), and direct insulation applications (high-voltage insulation supports, wall-through components, high-frequency insulation parts). Its underlying advantages are low dielectric loss (tanδ < 0.0001), high insulation strength, and thermal stability above a 1650°C softening point. Industry cases show that customers of quartz fiber companies such as Shenjiu are concentrated in aerospace wave-transparent materials, 5G/6G communications, AI servers, chip packaging, and high-frequency high-speed PCBs; high-voltage insulation and wall-through components are the near-term market for direct quartz rod applications. Lanjing Optoelectronics, with its 4N8 electronic-grade quartz rod (99.998% purity), simultaneously covers CCL supply, quartz fiber drawing stock, and insulation bar stock, building a second growth curve from its infrared heating business into the high-purity quartz materials industry by entering at the raw-material level.